Description
- Pressure Washer:
- 3500 PSI, 8 GPM
- Cold Water
- Honda GX690 Gas Engine – Electric Start
- Skid Frame
- 12 Gallon Fuel Tank
- Battery & Battery Box
- 36″ Gun & Wand Assembly with Quick Connect Fittings
- 200′ High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
- Quick Connect Color-Coded Spray Nozzles
- Cool Bypass for Pressure Washer – protects the pressure washer pump from overheating when trigger is released
- Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
- Includes 2 valve mini-manifold. Choose between 2 different soap options, or mix up both soaps to draw through your pressure washer soap injector. Ideal if you want to mix bleach & surfactant through your injector.
- Gas Engine Soft Wash System:
- Includes:
- 290 PSI, 11 GPM Diaphragm Pump – AR45 or Comet P40 (Which pump is used depends on availability. Pictured is the AR45.)
- ***Electric start soft wash available as an upgrade if desired.
- Honda GX160 or 200 Engine
- Titan Full-Frame Aluminum 12v Electric Hose Reel -with stainless steel manifold
- 300′ x 1/2″ of Yellow Soft Wash Hose – Max 600 PSI
- 55 Gallon Bleach Tank -with custom fabricated, heavy-duty hold-down bands
- Red Wash Down Gun
- Heavy Duty Tank Filter
- Soft Wash Proportioner:
- Solid Heavy Duty Manifold
- Chemical Resistant Bleach Valve
- Water Valve
- Surfactant Valve
- Includes: 7 Gal surfactant tank, hardware, plumbing, and installation
- 290 PSI, 11 GPM Diaphragm Pump – AR45 or Comet P40 (Which pump is used depends on availability. Pictured is the AR45.)
- Includes:
- Transfer Pump System with Dipstick Assembly:
- Use this transfer pump to transfer your concentrate into your tanks that aren’t easily accessible otherwise. Comes with a dipstick assembly that connects to the transfer pump and can be easily stored.
- Skid:
- 8’L x 48″W Base Deluxe Aluminum Skid with Welded Ladder Rack, Driver & Passenger Side Shelves, and Third Tailgate Shelf. Total width approx 7′ 8″.
- Water Tank:
- 200 Gallon Flat Bottom Tank – with heavy-duty hold-down bands
- Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
- Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
- Heavy Duty Tank Filter
- Hose Reels:
- Inlet Reel – 12v Electric Titan 3/4″ x 200′ Max – Aluminum 18″ Barrel – 1/2″ Swivel
- Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
- Pressure Washer Reel – 12v Electric Titan 3/8″ x 300′ Max – Aluminum 18″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
-
- Comes with the 200′ x 3/8″ gray hose installed on reel
-
- Inlet Reel – 12v Electric Titan 3/4″ x 200′ Max – Aluminum 18″ Barrel – 1/2″ Swivel
- Group 24 Battery & Battery Box:
-
-
-
- to provide power to all 3 electric hose reels, electric starts on machines, and transfer pump
-
-
-
- Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
- Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
- Training – Operations, winterization, and safety & maintenance training provided at pick up. Typically takes 30-90 minutes depending on the complexity of your build
ADD ON OPTIONS AVAILABLE:
- Electric Start Soft Wash System
- 24″ Surface Cleaner Rack Mount shown in photos (Can be upgraded to a 30″ surface cleaner rack for additional cost)
- 24″ Surface Cleaner shown in surface cleaner mount in photos (Can be upgraded to a 30″ surface cleaner for additional cost)
- Schertz Box for Pressure Washer – Remote control soap system for pressure washer soap injector. Includes installation.