Adjustable Soap Injector, 20% Adjustable Draw *Choose Your Size*


*Products may differ from photo based on model chosen.  Pictured is BAR6635.


  • Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.  NOTE: Length of hose will determine ability of injector to work properly.  These injectors draw with ease through 100′ of 3/8″ hose.  Many times they work with up to 200′ of 3/8″ hose. 
  • Choose Your Size
    •  2-3 GPM
    • 3-5 GPM
    • 5-8 GPM
  • Specifications
    • Draw Rate 0- 20%
    • Maximum pressure: 3600 PSI
    • Maximum temperature: 180F.
    • Inlet: 3/8″ MPT
    • Outlet: 3/8″ MPT
    • Chemical Draw: 1/4″ Barb

Additional information

Weight .45 lbs
Dimensions 3 × 2.5 × 1.5 in
Injector / GPM

1.8mm Injector, 2-3 GPM, 2.1mm Injector, 3-5 GPM, 2.3mm Injector, 5-8 GPM