LIGHTNING STRIKE: Customizable 8′ Single Axle Enclosed Trailer – 3000 PSI, 4.8 GPM Hot Washer

LIGHTNING STRIKE: Customizable 8′ Single Axle Enclosed Trailer – 3000 PSI, 4.8 GPM Hot Washer

LIGHTNING STRIKE: Customizable 8′ Single Axle Enclosed Trailer – 3000 PSI, 4.8 GPM Hot Washer


**Lead times may vary – standard production of a custom trailer unit takes two weeks.  Please call our office for the most accurate production time 330-753-8394.



  • 5′ x 8′ Enclosed Single Axle Trailer
  • 2990# GVWR, 2″ Hitch
  • Rear Swinging Door & Side Door

Pressure Washer:

  • Hydro Tek SS Series
  • 3000 PSI, 4.8 GPM
  • 16hp (479cc) Vanguard Engine, Twin Cylinder – Electric Key Start
  • Belt Drive Triplex Plunger Pump
  • EZ Align Belt Tensioning System: allows for easy, single bolt, belt tensioning adjustments.
  • Stainless Steel Frame, Coil Wrap & Panels: rugged & durable stainless steel offers corrosion resistance and protection of your valuable investment from the harshest environments.  Keeps you machine looking like new for years to come.
  • 12v Diesel Burner System
  • 388,000 BTU
  • Spiralast Coil: manufactured by Hydro Tek – Robotically fused 1/2″ schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue.  The coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps.  Lifetime Coil Warranty.
  • 8 Gallon Gas and Diesel Tanks: Heavy duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Safely refuel tanks away from hot engine. Extended run time with larger fuel capacity.
  • Adjustable Thermostat
  • Burst Disc Technology for Operator Safety
  • 250 Degree Steam Setting
  • Heavy Duty 48″ Insulated Wand & Trigger Gun Assy
  • Quick Connect Nozzles: 15 Deg & 40 Deg Spray Nozzles, 25 Deg Steam Nozzle

Trailer Package:

  • 100 Gallon Water Tank – with fabricated hold-down bands
    • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
    • Tank Drain – 3/4″ drain hose with ball valve that drains outside of trailer
    • Heavy Duty Tank Filter
  • (2) 7 Gallon Soap Tanks
  • 18″ Powder Coated High Pressure Hose Reel
    • Hand Crank
    • 350′ x 3/8″ Capacity
    • Comes with 200′ x 3/8″ High Pressure Gray Hose
  • 18″ Powder Coated Inlet Hose Reel
    • Hand Crank
    • 200′ x 3/4″ Capacity
    • Comes with 200′ x 3/4″ Flexzilla Garden Hose
  • (1) Stack bracket for 18″ Hose Reels
  • Downstream Soap Injection – Includes 20% adjustable, stainless steel injector
  • Battery & Battery Box (Battery not included if shipped)
  • Cool Bypass Pump Protection –  protects the pressure washer pump from overheating when trigger is released
  • Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
  • Installation – installation of above components on trailer, including labor, additional plumbing, hardware, & fittings
  • Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Add-On Options:

  • 12v Transfer Pump (includes installation) – Install 12 volt transfer pump to fill soap tanks inside of trailer from 55 Gallon drum
  • Chemical Resistant, Diamond Plate Textured Flooring (includes installation) – Protects wood floor of trailer from water  & harsh chemicals.  Slip resistant.  Gray diamond plate pattern.  A 3R exclusive option!


Additional information



Pressure Washer



Trailer Style

Build Type