Provides the ability to wash an entire project in 40% or more of the time vs. pressure washing panels by hand.

Reduces a 5 day job to 2 days and only requires a six person crew.  Two forklift operators, two "feeders", two "receivers", and one floater.

Cleans both sides of the product simultaneously, and can have panels run through either side of the washer.  Have an extra dirty panel?  Push it back into the washer without having to lift or carry it back around to the other side!

Water usage will drop from approximately 40,000 gallons for 5 days, to approximately 2,000 gallons. That's a $266 savings alone on water for a single event!

No more wasting precious time cleaning up the site you were cleaning at!  With the recycle and reclaim system and enclosed pass-through washer, there's significantly less clean-up to do after the job is complete. 

Water reclaim & filtration system enables water to be adequately cleaned before being sent back through the washer for reuse, greatly reducing down time and damage to the washers.

high pressure spray nozzles on the pass-through washer are contained inside the enclosed cabinet, significantly reducing the chance of injury from a hand-held washer.

Once the water tank is full, the Turf Protection Cleaner is a closed loop system, so this means it's completely mobile!  The pressure washers that power the pass-through washer run off of the 525 gallon water tank, and the water used to wash the panels is reclaimed into a three-stage system that cleans the water through three different filter types, and is then recycled back into the water tank for use.