ICE STORM: 14′ Open Tandem Axle Trailer – 3500 PSI, 8 GPM Cold Washer, 300 PSI, 11 GPM Gas Soft Wash System

Description

Trailer:

• 14′ x 6′ Open Tandem Axle Utility Trailer
• (2) Heavy Duty 3500lb Axles, 7000# GVWR
• Wood Deck Floor
• Rear Mesh Drop Gate

Pressure Pro Cold Water Pressure Washer:

• 3500 PSI, 8 GPM
• 22hp Honda GX690 Gas Engine
• Electric Start
• Heavy Duty General (GP) Triplex  Plunger Pump
• V-Belt Drive System
• External Unloader
• Thermal Relief Valve
• Set of Quick Connect Spray Nozzles
• Powder Coated Skid Mounted
• Anti-Vibration Rubber Isolators
• 28,000 Cleaning Units
• Bleeder Valve/Pump Primer– bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage.
• Cool Bypass System for Pressure Washer – protects the pressure washer pump from overheating when trigger is released.
• 12 Gallon Poly Fuel Tank

Gas Soft Wash System:

• 300 PSI, 11 GPM
• Honda GX160 Gas Engine
• Electric Start
• Engine Oil Drain Hose
• Corrosion Resistant Aluminum Skid Frame
• Anti-Vibration Rubber Isolators
• Featuring the Comet P40 Pump or AR45 Pump
• Proportioner System for Soft Wash:
  • Pull water, surfactant, and sodium hypochlorite without the need for batch mixing
  • Easily change solution ratios
  • Hi-Flow metering valves: no stress on pump and greater spray distance
  • Second soap valve optional
  • Flush Valve
  • Custom fabricated brackets for mounting
  • 7 Gallon Surfactant Tank
• 50 Gallon S/H Tank
• High Flow Rear Entry Red Wash Down Gun

Trailer Package:

• 325 Gallon Water Tank
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 2″ Ball Valve that releases to the of the passenger side of the van
  • Heavy Duty Water Tank Filter – to help keep debris out of your equipment
  • Garden Hose Fitting for Easy Connection of Inlet Hose
  • Heavy Duty Hold-Down Bands
• Titan 18″ Aluminum High Pressure Hose Reel – hand crank
  • 1/2″ Stainless Steel Manifold
  • Holds max of 450′ of 3/8″ hose
  • Includes 200′ High Pressure Hose, Gray, 1WB, 4200 PSI
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
• Titan 18″ Aluminum Inlet Hose Reel – hand crank
  • 1″ Iron Manifold – for quick filling of your water tank
  • Holds max of 200′ of 3/4″ hose
  • Includes 100′ Flexzilla Inlet Hose
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
• Titan 18″ Aluminum Soft Wash Hose Reel (Gas SW) – hand crank
  • Stainless Steel Manifold
  • Holds max of 300′ x 1/2″ hose
  • Includes 300′ x 1/2″, 600 PSI yellow soft wash hose
  • Includes Locking Pin
• (2) Stainless Steel Titan Stack Brackets & extra supports
• Downstream Soap Injection for the Pressure Washer – Low pressure soap application with an adjustable soap draw up to a 20% ratio.  When spraying soap with your pressure washer, the soap injector does all the diluting for you.  Injector is activated when using the provided low pressure quick connect soap nozzle provided.
• Installation – installation of above components into pictured van, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Add-On or Upgrade Options:

• Remote Rinse System for Gas Engine Soft Wash – From a distance, you can flush out your soft wash system completely, or switch from pulling SH to water with the push of a button.
• Max GPM Chemical Injector Bypass – with the touch of a button, you can bypass your chemical injector completely, offering full flow through your pressure washer.
• Remote Engine On/Off for Soft Wash Engine: Allows user to turn soft wash engine On/Off without having to walk back to your truck.

***If you plan to finance a trailer unit or machinery, final transactions for those items must take place with a 3R associate, pending approval of your application.  All website transactions must be paid in full at checkout.  If you have any questions about the financing process or timelines, please call us at 330-753-8394.  Thank you!