MILKY WAY: Customizable 16′ Enclosed Mobile Wash Trailer – 3500 PSI, 7.8 GPM Hot Washer, 300 PSI, 11 GPM Gas Engine Soft Wash, 4-Stage Wall Mounted RO/DI System

Description

Trailer:

• 16′ x 7′ Enclosed Tandem Axle Utility Trailer
• (2) Heavy Duty 3500lb Axles, 7000# GVWR
• Heavy Duty 2-5/16″ Hitch
• Side Entry Door
• Rear Ramp Door

Hot Water Pressure Washer:

• 3500 PSI, 7.8 GPM
• Honda GX690 Engine with Electric (key) Start
• Belt drive triplex GP TSF-Series pump with ceramic plungers
• Honda GX690 Engine, Electric Start
  • Performance-proven OHV engine with low-oil protection
• Heavy-duty powder coated steel square tube skid frame
• Stainless-steel coil wrap, control panel and removable
  front panel
• Horizontal schedule 80 pipe coil
• 120V/15-amp auxiliary GFCI outlet
• 2900-watt generator for efficient power to the burner and controls
• No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
• 10 Gallon Engine & Burner Fuel Tanks
• Adjustable thermostat
• Hour meter
• Miscellaneous
  • Temperature rise 150°F/66°C above ambient, maximum outlet
    temperature is 200°F
• Bleeder Valve/Pump Primer– bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
• Cool Bypass Pump Protection: protects the pressure washer pump from overheating when trigger is released
• Downstream Soap Injector – 20% Adjustable – Stainless Steel

Soft Wash System:

• 300 PSI, 11 GPM
• Honda GX160 OR GX200 Gas Engine
  • Electric Start
• Comet P40 Diaphragm Pump
• 55 Gallon Vertical SH Tank
  • With custom made aluminum hold-down bands
• 18″ Hand-Crank 300′ Aluminum TITAN Reel with Stainless Steel Manifold
  • 1/2″ Stainless Steel Manifold
  • Max Capacity: 300′ x 1/2″ Soft Wash Hose
  • Comes with 300′ x 1/2″ Heavy Duty Chemical Resistant Hose
• Pressure Gauge on Soft Wash Reel
• Red Wash Down Gun
• Proportioner System for Soft Wash System:
  • Pull water, surfactant, and sodium hypochlorite without the need for batch mixing
  • Easily change solution ratios
  • Hi-Flow metering valves: no stress on pump and greater spray distance
  • Second soap valve optional
  • Flush Valve
  • Includes 7 gallon surfactant Tank
• Remote Rinse Systems for Gas Engine Soft Wash:
  • From a distance, you can flush out your soft wash system completely, or switch from pulling SH to water with the push of a button!

Tucker RO/DI Window Cleaning Water Fed Pole System

• Powder coated aluminum panel.
• (4) Stainless Steel Filter Housings, fittings, plumbing, bypass valve, I/O Ports (3/4 GHT).
• 21” Carbon/Sediment pre-filter, (2) 21” RO Membranes, and a 21” DI post-filter.
• 5.3GPM Adjustable 110v Rotary Vein pump w/ 1/2hp Motor. Regulated to 150psi MAX. Waterproof on/off switch OR battery powered 12v pump.
• 6′ 12AWG power cord w/ 15amp waterproof GFCI. Test and Reset buttons.
• Dual Probe TDS meter. Measures RO product water and final Deionized product water.
• Tucker® – 40 Carbon Fiber Water Fed Pole
• Tucker® GLIDE Window Cleaning Brush
• 100′ Tucker 5/16″ OD Pole Tubing
• 1 Set of Male and Female Quick-Connect Fittings
• Tucker® LOCT Reach Around Gooseneck
• Acme tip to convert from water fed to trad pole
• *See below for hose & hose reel info for the Tucker sytem

Install Package: 

• 325 Gallon Water Tank – with heavy duty hold-down bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • (4) Heavy Duty T-Strainers Water Filter: for easy cleaning and pump protection
    • 1 Before the water tank, 1 before the pressure washer, 1 before the soft wash, 1 before the window cleaning system
  • 2″ Water Tank Drain with Valve to Outside Pass Side of Trailer: Easy hand wash or bucket fill access
• 55 Gallon Bleach Tank – with fabricated bands
• Four Stacked Titan 12v Electric Rewind Hose Reels:
  •  18″ 12v Electric Rewind 300′ Titan High Pressure Hose Reel (Pressure Washer)
    • 1/2″ Stainless Steel  Manifold for corrosion resistance
    • Max Capacity: 450′ x 3/8″ High Pressure Hose
    • Comes with 200′ High Pressure Hose – Gray
    • Stainless Steel Ball Valve – for easy switching between accessories
  • 18″ 12v Electric Rewind 100′ Titan Inlet Hose Reel (Inlet)
    • 1″ Manifold for quicker tank fill
    • Max Capacity: 250′ x 3/4″ Inlet Hose
    • Comes with 100′ Flexzilla 3/4″ Inlet Hose
  • 18″ 12v Electric Rewind 300′ Aluminum TITAN Reel (Soft Wash)
    • 1/2″ Stainless Steel Manifold
    • Max Capacity: 300′ x 1/2″ Soft Wash Hose
    • Comes with 300′ x 1/2″ Heavy Duty Chemical Resistant Hose
  •  18″ 12v Electric Rewind 300′ Titan High Pressure Hose Reel
    • 1/2″ Stainless Steel  Manifold for corrosion resistance
    • Max Capacity: 450′ x 3/8″ High Pressure Hose
    • Comes with 300′ Tucker Hose – Yellow
• (3) Stainless Steel Titan Stack Brackets
• Premium Hose Guides for All Reels – for easier hose management around turns & rewinding
• Max GPM Chemical Injector Bypass – with the touch of a button, you can bypass your chemical injector completely, offering full flow through your pressure washer.
• Downstream Manifold for Pressure Washer – Pull up to three different soaps or chemicals using your downstream soap injector through the pressure washer. Each soap/chemical line plumbed with a ball valve to regulate which items you want to draw or have turned off.
• Custom Ceiling-Mounted Ladder Rack Trolley System – Easily hang & slide your ladder into and out of your enclosed trailer and secure it into place while in transit or not in use.
• Transfer Pump- 12V, 7 GPM wall mounted pump to fill bleach tank from a bulk tank, includes hose to bleach tank, 15′ suction hose, and dip tube with check valve.
• Chemical Resistant Protective Flooring: Protects wood floor of trailer from water & harsh chemicals.  Slip Resistant.  Gray Diamond plate pattern.  A 3R exclusive!
• Painted Interior Walls & Doors: Bright White Gloss
• Installation – installation of above components into the trailer, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build