SIDEWINDER: Ford Transit Van Install – Dual 8 GPM Pressure Washers with Optional 16 GPM cleaning & 11 GPM Gas Engine Soft Wash

Description

**This equipment was installed in a 2023 Ford Transit 250 High Top Van.  Vehicles are to be supplied by the customer – 3R does not offer the option to purchase vans and/or box trucks through us.  If you’re looking for a custom install in a different style or model vehicle, please reach out to us via our contact form or through email and we’d be happy to get you an accurate quote for your available vehicle!

(2)  8 GPM Cold Water Pressure Washers

• 3500 PSI, 8 GPM
• 22hp Honda GX690 Gas Engine
• Electric Start
• Industrial Duty General Pump Triplex Plunger Pump
• High Amp Upgraded Charging System
• Block Mounted High-Flow Pressure Valve
• Thermal Relief Valve
• Ultra Rugged Corrosion Resistant Extruded Aluminum Frame
• Easy Access Two Piece Aluminum Belt Guard
• 4-Groove Bandit Belt for uniform tension & maximum power transfer
• Easy Engine & Pump Oil Drain System
• Quad Anti-Vibration Rubber Isolators
• 36″ Wand with 1/4″ QC Socket where spray nozzles attach
• Trigger Gun w/ Safety Lock-Off and 3/8″ QC Plug at inlet

Soft Wash System

• Gas Engine Soft Wash System:
  • 300 PSI, 11 GPM
  • Electric Start 6.5hp Honda GX160 OR GX200 Engine
  • High Volume Comet P40 Diaphragm Pump
  • Gear Driven
  • Bolt-On Regulator
  • Pressure Gauge (on soft wash hose reel)
  • Heavy Duty Aluminum Skid Frame
  • Red Wash Down Gun
• Proportioner Systems for Soft Wash:
  • Pull water, surfactant, and sodium hypochlorite (bleach) without the need for batch mixing
  • Easily change solution ratios
  • Hi-Flow metering valves: no stress on pump and greater spray distance
  • Second soap valve optional, but not included
  • Flush Valve for rinsing corrosive chemicals from system
  • Includes 7 Gallon Surfactant Tank

Installation Package:

• Cool Bypass System for Pressure Washers:
  • protects the pressure washer pumps from overheating when trigger is released.
• Bleeder Valve / Pump Primer for each pressure washer
• (4) 100 Gallon Water Tanks
  • Heavy Duty Hold Down Bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 1″ Tank drain that drains to passenger side of van
• 100 Gallon Bleach Tank
• Titan 12″ Electric Rewind Aluminum High Pressure Hose Reel (Pressure Washer 1)
  • 1/2″ Stainless Steel Manifold
  • Premium Hose Guides
  • Holds max of 300′ of 3/8″ high pressure hose
  • 200′ x 3/8″ High Pressure Hose, Gray
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
  • Stainless Steel Ball Valve: for easily switching between accessories
• Titan 18″ Electric Rewind Aluminum High Pressure Hose Reel (Pressure Washer 2 – or when both pressure washers are tied together)
  • 1/2″ Stainless Steel Manifold
  • Premium Hose Guides
  • Holds max of 300′ of 1/2″ high pressure hose
  • 200′ x 1/2″ High Pressure Hose, Black
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
• Titan 18″ Electric Rewind Aluminum Inlet Hose Reel (Inlet Reel #1)
  • 1″ Manifold
  • Holds max of  200′ of 3/4″ hose
  • 150′ Flexzilla Inlet Hose
  • Includes Locking Pin
  • Fitting Installed On Reel: to secure hose while in-transit
• Titan 12″ Electric Rewind Aluminum Inlet Hose Reel (Inlet Reel #2)
  • 1″ Manifold
  • Holds max of  100′ of 3/4″ hose
  • 100′ Flexzilla Inlet Hose
  • Includes Locking Pin
  • Fitting Installed On Reel: to secure hose while in-transit
• Titan 18″ Electric Rewind Aluminum Soft Wash Hose Reel (Soft Wash):
  • 1/2″ Stainless Steel Manifold
  • Premium Hose Guides
  • Holds max of 300′ x 1/2″ hose
  • Includes 300′ x 1/2″, 600 PSI yellow soft wash hose
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
  • Pressure Gauge for Soft Wash Installed on Reel: for easy curbside access
• (3) Titan Stainless Steel Stack Brackets
• Downstream Soap Injection (pressure washer #1): Includes stainless steel injector
• Remote Rinse Systems for Gas Engine Soft Wash:
  • From a distance, you can flush out your soft wash system completely, or switch from pulling SH to water with the push of a button!
• Flow Pro Remote Chemical Injector Bypass: with the touch of a button, you can bypass your chemical injector completely, offering full flow through your pressure washer! (installed on Pressure Washer #1)
• Transfer Pump System:
  • REMCO 7 GPM Pump
  • Transfer Manifold – Allows you to easily transfer chemicals into your tanks without a mess or squeezing into inaccessible parts of your van!  Just drop your transfer pump hose into your concentrate outside of the vehicle, and select which tank (by turning the correct ball valve) you’d like to transfer the concentrate into.
• 7 Gallon Soap Tank
• Heavy Duty T-Strainer Water Filters:
  • 1 Filters Pre-Water Tank
  • 1 Filter Pre-Soft Wash Pump
  • 2 Filters Pre-Pressure Washer Pumps
• 22 Gallon Aluminum Fuel Tank
  • with gauge
• Mosmatic Gun Swivels (for both pressure washing wands)
• (3) 48″ x 40″ Aluminum Pallet Bases
  • with 4-way fork access
• Aluminum Table for Stacking Washers
• 49″ Mondo Surface Cleaner
  • Aluminum break-a-part handle for storage
  • Trigger Gun Controlled
  • Quick Connection
  • (4) 3″ Pivoting Casters
  • Hot or cold water applications (up to 212°F)
  • 2,000-4,000 PSI
  • 8-12 GPM, Modified up to 20 GPM
• Custom Fabricated Surface Cleaner Mount for 48″ Mondo Surface Cleaner
• Installation – installation of above components into pictured van, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Add-On Options:

• EZ Winterizing System – quickly and easily winterize your whole system to protect against freezing.  Comes with 20 gallon tank for antifreeze.
• Premium Hose Guides – installed on all 5 TITAN hose reels – makes extending and rewinding your hoses easy and efficient, and makes pulling hose around corners no problem!
• Spare Parts Kit: Convenient to keep on board your rigs if small repairs are needed!  We’ll stock this spare parts kit with some of the most common wearable parts & replacement parts needed regularly on a pressure washing / soft wash build.

1. NOTICE: Owner should, at minimum, have a headache rack installed behind the driver and passenger seats to prevent any objects from reaching passengers in the event of, but not limited to, a hard brake, or accident. Full closure between the vehicle cabin area and cargo area is preferred. This is the sole responsibility of the vehicle owner, not 3R Sales & Service.
2. If you plan to finance a trailer unit or machinery, final transactions for those items must take place with a 3R associate, pending approval of your application.  All website transactions must be paid in full at checkout.  If you have any questions about the financing process or timelines, please call us at 330-753-8394.  Thank you!