RAPTOR: Customizable 5.5′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – 12v Soft Wash System

RAPTOR: Customizable 5.5′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – 12v Soft Wash System

RAPTOR: Customizable 5.5′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – 12v Soft Wash System

$21,510.00

Please chose any of the following upgrade or options for your build. For more detail on some of these options, please check the bottom of the listing.

Description

  • Pressure Washer:
    • 3500 PSI, 8 GPM
    • Cold Water
    • Honda GX690 Gas Engine – Electric Start
    • Skid Frame
    • 6 Gallon Fuel Tank
    • Battery & Battery Box
    • 36″ Gun & Wand Assembly with Quick Connect Fittings
    • 200′ High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
    • Quick Connect Color-Coded Spray Nozzles
  • Cool Bypass for Pressure Washer – protects the pressure washer pump from overheating when trigger is released
  • Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
  • 12v Soft Wash System:
    • Includes:
      • 100 PSI, 7 GPM Remco Diaphragm Pump
      • Titan Full-Frame Aluminum Hand Crank Hose Reel -with stainless steel manifold
      • 200′ x 1/2″ of Yellow Soft Wash Hose – Max 600 PSI
      • Accumulator Tank
      • On/Off Toggle Switch
      • Deep Cycle Battery & Battery Box
      • NOCO Battery Charger
      • 55 Gallon Bleach Tank -with custom fabricated, heavy-duty hold-down bands
      • Red Wash Down Gun OR Gun/Wand Assembly with JROD
      • Heavy Duty Tank Filter
      • Soft Wash Proportioner:
        • Solid Heavy Duty Manifold
        • Chemical Resistant Bleach Metering Valve
        • Water Metering Valve
        • Surfactant Metering Valve
        • Includes: 7 Gal surfactant tank, hardware, plumbing, and installation
  • Skid:
    • 5.5’L x 48″W Heavy Duty Deluxe Aluminum Skid with Welded Ladder Rack
  • Water Tank:
    • 100 Gallon Flat Bottom Tank – with heavy-duty hold-down bands
    • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
    • Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
    • Heavy Duty Tank Filter
  • Hose Reels:
    • Inlet Reel – Titan 3/4″ x 100′ Max – Aluminum 12″ Barrel – 1/2″ Swivel
      • Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
    • Pressure Washer Reel – Titan 3/8″ x 300′ Max – Aluminum 12″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
      • Comes with the 200′ x 3/8″ gray hose installed on reel
  • Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
  • Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
  • Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

 

Approximate Overall Dimensions: 66″ D x 90″ W (including side shelves) x 51″ H

 

ADD ON OPTIONS AVAILABLE:

  • Surface Cleaner Rack – Aluminum surface cleaner rack installed – includes hinged locking door for added security
  • Schertz Box for Soft Wash – Remote control soap system for 12v soft wash system.  Includes installation.
  • Schertz Box for Pressure Washer – Remote control soap system for pressure washer soap injector.  Includes installation.
  • Downstream Manifold – Four lines with poly ball valves – choose between 3 different soap options, or mix up to three soaps to draw through your pressure washer soap injector.  Ideal if you want to mix bleach & surfactant through your injector.
  • 21″ Stainless Steel Mosmatic Surface Cleaner

 

 

**VEHICLE NOT PROVIDED BY 3R**

 

**Installation of the assembly into your vehicle is not included.  Please contact us at 330-753-8394 for pricing on this service.  Service only available at our Barberton, OH location.

****Lead times may vary. standard production of a custom skid unit takes one-two weeks.  Please call our office for the most accurate production time  330-753-8394.

***Weights and overall dimensions are subject to change.  For questions, please contact the office at 330-753-8394.

Additional information

Engine

GPM

Pressure Washer

PSI

,

Pump

,

Soft Wash System

Build Type