BEHEMOTH: Customizable 8′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer & 3000 PSI, 5.5 GPM Cold Water Washer – Gas Engine Soft Wash System

Description

Skid:

• 8’L x 48″W Base Deluxe Aluminum Skid with
  • Welded Ladder Rack
  • Driver & Passenger Side Shelves
  • Third Tailgate Shelf.

Cold Pressure Washer 1:

• 3500 PSI, 8 GPM
• Cold Water
• Honda GX690 Gas Engine – Electric Start
• Powder Coated Skid Frame
• 11 Gallon Aluminum Fuel Tank with Gauge
• Battery & Battery Box
• 36″ Gun & Wand Assembly with Quick Connect Fittings
• 200′ High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
• Quick Connect Color-Coded Spray Nozzles
• Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
• Downstream Soap Injection for the Pressure Washers – Hi-Flow, 20% Adjustable
• Cool Bypass for Pressure Washers – protects the pressure washer pumps from overheating when trigger is released

Cold Pressure Washer 2:

• 3000 PSI
• 5.5 GPM
• 13hp Honda GX390 Gas Engine
• Electric Start
• Belt Drive Comet Industrial RW Series Triplex Plunger Pump
• External Unloader
• Thermal Relief Valve
• Aluminum Skid Frame
• Pressure System Innovations (PSI) Model
• 16,500 Cleaning Units
• Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
• Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
• Cool Bypass for Pressure Washers – protects the pressure washer pumps from overheating when trigger is released

Gas Engine Soft Wash:

• 290 PSI, 11 GPM Diaphragm Pump – AR45 or Comet P40 (Which pump is used depends on availability.  Pictured is the P40.)
• Honda GX160 or 200 Engine
  • Electric Start
• Red Wash Down Gun
• Heavy Duty Tank Filter
• Soft Wash Proportioner:
  • Solid Heavy Duty Manifold
  • Chemical Resistant Bleach Valve
  • Water Valve
  • Surfactant Valve

Skid Package: 

• Water Tank:
  • (2) 100 Gallon Slim Tanks Combined for 200 Gallon Capacity – with heavy-duty hold-down bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
  • Heavy Duty Tank Filter
• 100 Gallon Bleach Tank: with fabricated hold down bands
• 7 Gallon Surfactant Tank
• Remote Controlled Soap Injector Bypass (for pressure washer downstream soap injector): allows you to use low pressure nozzles without having to walk back and turn off soap injector. Also allows for full flow through hoses. *FOR 8 GPM MACHINE ONLY*.
• Hose Reels:
  • Inlet Reel – 12v Electric Titan 3/4″ x 200′ Max – Aluminum 18″ Barrel – 1/2″ Swivel
    • Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
  • Pressure Washer Reel (1) – 12v Electric Titan 3/8″ x 400′ Max – Aluminum 18″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
    • Comes with the 200′ x 3/8″ gray hose installed on reel
  • Pressure Washer Reel (2) – 12v Electric Titan 3/8″ x 400′ Max – Aluminum 18″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
    • Comes with the 200′ x 3/8″ blue hose installed on reel
  • Soft Wash Reel – 12v Electric Titan 3/8″ x 300′ Max – Aluminum 18″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
    • Comes with 300′ x 12″ Yellow 600 PSI Soft Wash Hose
  • Stainless Steel Stack Bracket: for stacked reels
  • Group 24 Battery & Battery Box: to provide power to all 3 electric hose reels & electric starts on machines
• 11 Gallon Aluminum Fuel Tank for 8 GPM Washer
• Water Filters: installed before both pressure washers & soft wash system
• Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Add-On Options: (pictured in photos)

• Downstream Manifold: Pull up to 3 different soaps or chemicals using your downstream soap injector through the pressure washer. Each soap/chemical line plumbed with a ball valve to regulate which items you want to draw or have turned off. FOR 8 GPM UNIT ONLY.

**Installation of the assembly into your vehicle is not included.  Please contact us at 330-753-8394 for pricing on this service.  Service only available at our Barberton, OH location.

****Lead times may vary. standard production of a custom skid unit takes one-two weeks.  Please call our office for the most accurate production time  330-753-8394.

***Weights and overall dimensions are subject to change.  For questions, please contact the office at 330-753-8394.