MAMMOTH: Customizable 8′ Deluxe Aluminum Skid Assembly – 3000 PSI, 4.8 GPM Hot Water Washer – 12v Soft Wash System

Description

• Pressure Washer:
  • 3000 PSI, 4.8 GPM
  • Hot Water
  • Vanguard 479cc Gas Engine – Electric Start
  • Stainless Steel Skid Frame, Coil Wrap, and Control Panel
  • 8 Gallon Fuel Tanks
  • 12v Diesel Burner System
  • 388,000 BTU
  • Adjustable Thermostat
  • 250 Degree Steam Setting
  • Battery & Battery Box
  • 48″ Gun & Wand Assembly with Quick Connect Fittings
  • 200′ Grey High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
  • Quick Connect Color-Coded Spray Nozzles
• Cool Bypass for Pressure Washer – protects the pressure washer pump from overheating when trigger is released
• Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
• 12v Soft Wash System:
  • Includes:
    • 100 PSI, 7 GPM Remco Diaphragm Pump
    • Titan Full-Frame Aluminum Hand Crank Hose Reel -with stainless steel manifold
    • 300′ x 1/2″ of Yellow Soft Wash Hose – Max 600 PSI
    • Accumulator Tank
    • On/Off Toggle Switch
    • Deep Cycle Battery & Battery Box
    • NOCO Battery Charger
    • 55 Gallon Bleach Tank -with custom fabricated, heavy-duty hold-down bands
    • Red Wash Down Gun OR Gun/Wand Assembly with JROD
    • Heavy Duty Tank Filter
    • Soft Wash Proportioner:
      • Solid Heavy Duty Manifold
      • Chemical Resistant Bleach Metering Valve
      • Water Metering Valve
      • Surfactant Metering Valve
      • Includes: 7 Gal surfactant tank, hardware, plumbing, and installation
• Skid:
  • 8’L x 48″W Heavy Duty Deluxe Aluminum Skid with Welded Ladder Rack & Optional Third Tailgate Shelf Included
• Water Tank:
  • 200 Gallon Flat Bottom Tank – with heavy-duty hold-down bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
  • Heavy Duty Tank Filter
• Hose Reels:
  • Inlet Reel – Titan 3/4″ x 100′ Max – Aluminum 12″ Barrel – 1/2″ Swivel
    • Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
  • Pressure Washer Reel – Titan 3/8″ x 300′ Max – Aluminum 12″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
    • Comes with the 200′ x 3/8″ gray hose installed on reel
• Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
• Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

ADD ON OPTIONS AVAILABLE:

• Surface Cleaner Rack for 21″ Surface Cleaner (Pictured)– Aluminum surface cleaner rack installed – includes hinged locking door for added security
• Schertz Box for Soft Wash (Pictured)– Remote control soap system for 12v soft wash system.  Includes installation.
• Schertz Box for Pressure Washer (Pictured)– Remote control soap system for pressure washer soap injector.  Includes installation.
• Downstream Manifold – Four lines with poly ball valves – choose between 3 different soap options, or mix up to three soaps to draw through your pressure washer soap injector.  Ideal if you want to mix bleach & surfactant through your injector.
• 21″ Stainless Steel Mosmatic Surface Cleaner (Pictured in Surface Cleaner Mount)

**VEHICLE NOT PROVIDED BY 3R**