BOA: Customizable Ford 250 (2015-2022) Van Installation – 5.5 GPM Pressure Washer

BOA: Customizable Ford 250 (2015-2022) Van Installation – 5.5 GPM Pressure Washer

BOA: Customizable Ford 250 (2015-2022) Van Installation – 5.5 GPM Pressure Washer

$12,204.00

Available to Order - call for current lead time

**Lead times may vary – standard production of a custom trailer unit takes two weeks.  Please call our office for the most accurate production time 330-753-8394.

Description

*This install fits into a Ford 250 Transit Van – Years 2015-2022. Vehicles are to be supplied by the customer – 3R does not offer the option to purchase vans and/or box trucks through us.  If you’re looking for a custom install in a different style or model vehicle, please reach out to us via our contact form or through email and we’d be happy to get you an accurate quote for your available vehicle!

Pressure Washer:

  • 3500 PSI, 5.5 GPM
  • Honda V-Twin GX630 Gas Engine with Electric Start & Hour Meter
  • 18 Amp High Output Charging System
  • Belt Drive General Triplex Plunger Pump
  • Genuine OEM Honda Muffler
  • External Unloader
  • Thermal Relief Valve
  • Aluminum Skid Frame
  • Pressure System Innovations (PSI) Model
  • 36″ Wand with 1/4″ QC Socket where spray nozzles attach
  • Trigger Gun w/ Safety Lock-Off and 3/8″ QC Plug at inlet
  • 3/8 x 50′ High Pressure Hose -Wire Braided, Gray Non-Marking, Quick Connect Fittings
  • Quick Connect Downstream Soap Injector Kit & QC Soap Nozzle

Install Package:

  • 200 Gallon Water Tank
    • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
    • Tank Drain – 1″ drain hose with ball valve that drains to rear of truck
    • Heavy Duty Water Tank Filter – to help keep debris out of your equipment
    • Garden Hose Fitting for Easy Connection of Inlet Hose
    • Heavy Duty Hold-Down Bands
  • Cool Bypass System for Pressure Washer – protects the pressure washer pump from overheating when trigger is released.
  • (2) Titan Aluminum High Pressure Hose Reels
    • 1/2″ Stainless Steel Manifold
    • Holds max of 300′ of 3/8″ hose
    • 100′ High Pressure Hose, Gray, 1WB, 4200 PSI on EACH reel
    • Includes Locking Pin
    • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
    • The middle pressure washer hose reel is the primary reel and is connected to the pressure washer installed in van.  The top pressure washer reel is for connecting a second portable pressure washer OR for use as a back up reel.  For example, if you pressure washer hose fails on the middle hose reel, you can quick connect the jumper hose from the middle reel to the back up reel and start washing again within a couple minutes.  You can then replace the hose on the middle reel when you get back to your facility instead of on the jobsite.
  • Titan Aluminum Inlet Hose Reel
    • Stainless Steel Manifold
    • Holds max of 100′ of 3/4″ hose
    • 100′ Flexzilla Inlet Hose
    • Includes Locking Pin
    • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
  • (2) Titan Stack Brackets & Additional Custom Fabricated Supports – to stack reels 3 high & ensure stability when the vehicle is in motion.
  • Narrow 11 Gallon Aluminum Fuel Tank – with fuel gauge.  Allows maximum use of floor space in vans so you have more room for additional cargo or an additional portable washer.
  • Installation – installation of above components into pictured van, including labor, additional plumbing, hardware, & fittings
  • Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

 

  1. NOTICE: Owner should, at minimum, have a headache rack installed behind the driver and passenger seats to prevent any objects from reaching passengers in the event of, but not limited to, a hard brake, or accident. Full closure between the vehicle cabin area and cargo area is preferred. This is the sole responsibility of the vehicle owner, not 3R Sales & Service.
  2. If you plan to finance a trailer unit or machinery, final transactions for those items must take place with a 3R associate, pending approval of your application.  All website transactions must be paid in full at checkout.  If you have any questions about the financing process or timelines, please call us at 330-753-8394 or at 800-824-8252.  Thank you!
  3. Lead times may vary– standard production of a custom skid unit takes one-two weeks.  Please call our office for the most accurate production time 330-753-8394.

Additional information

Engine

GPM

Pressure Washer

PSI

Pump

Build Type