LEATHERBACK: Customizable 16′ Ford F550 Box Truck Installation – 3000 PSI, 10 GPM Hot Washer – 2 Gun System & Hydrant Fill

Description

**This equipment was installed in a 16′ Ford F550 Box Truck.  Vehicles are to be supplied by the customer – 3R does not offer the option to purchase vans and/or box trucks through us.  If you’re looking for a custom install in a different style or model vehicle, please reach out to us via our contact form or through email and we’d be happy to get you an accurate quote for your available vehicle!

How Water Washer – Set up to be used as either (1) gun at 3000 PSI, 10 GPM or (2) guns at 3000 PSI, 5 GPM each. 

• 3000 PSI, 10 GPM
  • When using the two gun system, each gun will run 3000 PSI, 5 GPM
• Honda Fuel Injected iGX800 Engine with Electric (key) Start
• Pump
  • Belt drive triplex GP TSF-Series pump with ceramic plungers
  • Adjustable high pressure detergent injector
• Engine
  • Honda GX800, Electric Start
  • Performance-proven OHV engine with low-oil protection – battery not included
• Frame
  • Heavy-duty powder coated steel square tube skid frame
  • Stainless-steel coil wrap, control panel and removable
    front panel
• Components
  • Horizontal schedule 80 pipe coil
  • 120V/15-amp auxiliary GFCI outlet
  • 2900-watt generator for efficient power to the burner and controls
  • No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
  • 10 Gallon Engine & Burner Fuel Tanks
  • Three-way ball valve for inlet selection
  • Detergent and steam valves
  • Adjustable thermostat
  • Hour meter
• Miscellaneous
  • Temperature rise 150°F/66°C above ambient, maximum outlet
    temperature is 200°F
• Cool Bypass System for Pressure Washer – protects the pressure washer pump from overheating when trigger is released.
• Bleeder Valve / Pump Primer for pressure washer – helps drain air out of the line for an easy start up on your washer
• (2) Gun & Wand Assemblies
• QC Spray Nozzles for use as a single gun system or two-gun system

Install Package:

• (2) 525 Gallon Water Tanks: Tied together
  • Heavy Duty Hold Down Bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 2″ Tank drain that drains through the passenger side floor of truck
  • Hydrant Tank Fill – 2″ Cam lock exterior connection with 2 in PVC plumbing, to fill tank with Hydrant (this will not have float valve attached)
• 55 Gallon Bleach Tank
  • with fabricated hold down bands
• 20 Gallon Soap Tank
  • with fabricated hold down bands
• Titan 12″ Hand Crank Aluminum High Pressure Hose Reel (Pressure Washer Gun 1)
  • 1/2″ Stainless Steel Manifold
  • Holds max of 300′ of 3/8″ high pressure hose
  • 200′ x 3/8″ High Pressure Hose, Gray
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
  • Stainless Steel Ball Valve: for easily switching between accessories
• Titan 12″ Hand Crank Aluminum Inlet Hose Reel (Inlet Reel)
  • 1″ Manifold
  • Holds max of  100′ of 3/4″ hose
  • 100′ Flexzilla Inlet Hose
  • Includes Locking Pin
  • Fitting Installed On Reel: to secure hose while in-transit
• Titan 12″ Hand Crank Aluminum Soft Wash Hose Reel (Pressure Washer Gun 2):
  • 1/2″ Stainless Steel Manifold
  • Holds max of 200′ x 1/2″ hose
  • Includes 200′ x 3/8″, high pressure blue Hose
  • Includes Locking Pin
  • Quick Connect Fitting Installed On Reel: to secure hose while in-transit
• (2) Stainless Steel Stack Brackets for Hose Reels
• Downstream Soap Injection: Hi -Flow, 20% Adjustable. Features dip tube assy. that can be dropped into any tank on truck.
• Heavy Duty T-Strainer Water Filters:
  • 2 Filters Pre-Water Tanks
  • 1 Filters Pre-Pressure Washer Pump
• Downstream Manifold: pull up to 3 different chemicals through your pressure washer soap injector. Two lines with poly ball valves to tanks and (1) dip line for miscellaneous detergents you use, but do not have tanks for.
• Chemical Resistant Protective Flooring – Protects wood floor of trailer from water & harsh chemicals.  Slip Resistant.  Gray Diamond plate pattern.  A 3R exclusive!
• Painted Interior Walls Gloss White – for easier cleanup and moisture resistance
• Installation – installation of above components into pictured van, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Add-On Options

• EZ Antifreeze System with 35 Gallon Vertical Tank – make winterizing your system easier than ever!  Perfect addition for anyone who works throughout all seasons, or who lives in the North.