RAPTOR: Ready-Made 5.5′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – 12v Soft Wash System

Description

• Pressure Washer:
  • 3500 PSI, 8 GPM
  • Cold Water
  • Honda GX690 Gas Engine – Electric Start
  • Skid Frame
  • 11 Gallon Aluminum Fuel Tank – with fuel gauge
  • Battery & Battery Box
  • 36″ Gun & Wand Assembly with Quick Connect Fittings
  • 200′ High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
  • Quick Connect Color-Coded Spray Nozzles
• Cool Bypass for Pressure Washer – protects the pressure washer pump from overheating when trigger is released
• Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
• Downstream Soap Manifold – pull from your soap tank, SH tank, or from a separate “dip” line that can be dropped into your water tank, or any other bucket of detergent you need to use.
• 12v Soft Wash System:
  • Includes:
    • 100 PSI, 7 GPM Remco Diaphragm Pump
    • Titan Full-Frame Aluminum Hand Crank Hose Reel -with stainless steel manifold
      • with locking quick connects
    • 200′ x 1/2″ of Yellow Soft Wash Hose – Max 600 PSI
    • Accumulator Tank
    • On/Off Toggle Switch
    • Deep Cycle Battery & Battery Box
    • NOCO Battery Charger
    • 55 Gallon Bleach Tank -with custom fabricated, heavy-duty hold-down bands
    • Red Wash Down Gun OR Gun/Wand Assembly with JROD
    • Heavy Duty Tank Filter
    • Soft Wash Proportioner:
      • Solid Heavy Duty Manifold
      • Chemical Resistant Bleach Metering Valve
      • Water Metering Valve
      • Surfactant Metering Valve
      • Includes: 7 Gal surfactant tank, hardware, plumbing, and installation
• Skid:
  • 5.5’L x 48″W Base Heavy Duty Deluxe Aluminum Skid with Welded Ladder Rack
• Water Tank:
  • 100 Gallon Flat Bottom Tank – with heavy-duty hold-down bands
  • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
  • Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
  • Heavy Duty Tank Filter
• Hose Reels:
  • Inlet Reel – Titan 3/4″ x 100′ Max – Aluminum 12″ Barrel – 1/2″ Swivel
    • Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
    • Locking Quick Connect Fittings
  • Pressure Washer Reel – Titan 3/8″ x 300′ Max – Aluminum 12″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
    • Comes with the 200′ x 3/8″ gray hose installed on reel
    • Locking Quick Connect Fittings
• Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
• Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
• Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

Approximate Overall Dimensions: 66″ D x 90″ W (including side shelves) x 51″ H

ADD ON OPTIONS AVAILABLE:

• Surface Cleaner Rack Installed

@3rpressurewashers

RAPTOR Listing: https://3rpressurewashers.com/products/ready-made-5-5-deluxe-aluminum-skid-assembly-3500-psi-8-gpm-cold-water-washer-12v-soft-wash-system/

♬ original sound – 3rpressurewashers