YETI: Customizable 8′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – Gas Engine Soft Wash System

YETI: Customizable 8′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – Gas Engine Soft Wash System

YETI: Customizable 8′ Deluxe Aluminum Skid Assembly – 3500 PSI, 8 GPM Cold Water Washer – Gas Engine Soft Wash System

$27,620.00

Finance payments as low as $611/mo!  Click here for more information!

Description

  • Pressure Washer:
    • 3500 PSI, 8 GPM
    • Cold Water
    • Honda GX690 Gas Engine – Electric Start
    • Powder Coated Skid Frame
    • 11 Gallon Aluminum Fuel Tank with Gauge
    • Battery & Battery Box
    • 36″ Gun & Wand Assembly with Quick Connect Fittings
    • 200′ High Pressure Hose with Quick Connects (this is what will be installed on the high pressure reel listed below)
    • Quick Connect Color-Coded Spray Nozzles
  • Cool Bypass for Pressure Washer – protects the pressure washer pump from overheating when trigger is released
  • Downstream Soap Injection for the Pressure Washer – Hi-Flow, 20% Adjustable
    • Includes 3 valve mini-manifold.  Choose between 3 different soap options, or mix up soaps to draw through your pressure washer soap injector.  Ideal if you want to mix bleach & surfactant through your injector.  Third option on the manifold is connected to a hose that can be used to drop into any bucket of specialty detergent you need to use without having to add them to the soap tanks on your rig.
  • Gas Engine Soft Wash System:
    • Includes:
      • 290 PSI, 11 GPM Diaphragm Pump – AR45 or Comet P40 (Which pump is used depends on availability.  Pictured is the P40.)
        • Electric Start 
      • Honda GX160 or 200 Engine
      • 18″ Titan Full-Frame Aluminum 12v Electric Hose Reel -with stainless steel manifold
      • 300′ x 1/2″ of Yellow Soft Wash Hose – Max 600 PSI
      • 55 Gallon Bleach Tank -with custom fabricated, heavy-duty hold-down bands
      • Red Wash Down Gun
      • Heavy Duty Tank Filter
      • Soft Wash Proportioner:
        • Solid Heavy Duty Manifold
        • Chemical Resistant Bleach Valve
        • Water Valve
        • Surfactant Valve
        • Includes: 7 Gal surfactant tank, hardware, plumbing, and installation
  • Skid:
    • 8’L x 48″W Base Deluxe Aluminum Skid with Welded Ladder Rack, Driver & Passenger Side Shelves, and Third Tailgate Shelf.  Total width approximately 7′ 8″.
  • Water Tank:
    • 200 Gallon Flat Bottom Tank – with heavy-duty hold-down bands
    • Tank Overflow Valve – 3/4″ water fill – stop water flow when tank is full and will continue to fill when water level drops
    • Tank Drain – 3/4″ drain hose with ball valve that drains to rear of truck
    • Heavy Duty Tank Filter
  • Hose Reels:
    • Inlet Reel – 12v Electric Titan 3/4″ x 200′ Max – Aluminum 18″ Barrel – 1/2″ Swivel
      • Comes with 100′ x 3/4″ Flexzilla inlet hose installed on reel
    • Pressure Washer Reel – 12v Electric Titan 3/8″ x 300′ Max – Aluminum 18″ Barrel – 1/2″ Swivel – Stainless Steel Manifold
        • Comes with the 200′ x 3/8″ gray hose installed on reel
  • Remote Rinse System for Gas Engine Soft Wash:
    • From a distance, you can flush out your soft wash system completely, or switch from pulling SH to water with the push of a button.
      • 16 gallon antifreeze tank
  • Group 24 Battery & Battery Box:
          • to provide power to all 3 electric hose reels, electric starts on machines, and transfer pump
  • Bleeder Valve / Pump Primer – bleeds air out of incoming water hose for pressure washer, allowing for easy start-up & preventing pump damage
  • Installation – installation of above components on deluxe aluminum skid, including labor, additional plumbing, hardware, & fittings
  • Training – Operations, winterization, and safety & maintenance training provided at pick up.  Typically takes 30-90 minutes depending on the complexity of your build

 

Add On Options Available (all pictured in photos): 

  • EZ Winterize System: Quickly winterizes your pressure washer & soft wash system – including reels, hoses, plumbing, & more!  Will draw into soft wash batch system or into water line of proportioner valve.
  • 24″ Stainless Steel BE Whirl-a-way Surface Cleaner
  • 24″ Surface Cleaner Rack Mounted on Deluxe Skid Assembly

**Installation of the assembly into your vehicle is not included.  Please contact us at 330-753-8394 for pricing on this service.  Service only available at our Barberton, OH location.

****Lead times may vary. standard production of a custom skid unit takes one-two weeks.  Please call our office for the most accurate production time  330-753-8394.

***Weights and overall dimensions are subject to change.  For questions, please contact the office at 330-753-8394.

Additional information

Engine

GPM

Pressure Washer

PSI

,

Pump

Soft Wash System

Build Type